Versatile Steel Formwork Solutions for Concrete Beam Construction

• After-sales Service: Available
• Warranty: Available
• Certification: ISO, ROHS, CE
• Model NO.: Customized
• Material: Steel
• Type: Beam Formwork
• Transport Package: Customized
• Specification: Customized
• Trademark: shandong shangyuan
• Origin: Shandong, China
• HS Code: 7308400000
• Production Capacity: 30000tons/Year

Product Description

Product Description

Durable Steel Tie Beam Formwork for Concrete Construction Projects

Steel formwork for tie beams is a type of steel formwork used in bridge construction to connect two piles or columns of the same pier number, connect and reinforce bridge piers or pile foundations, and enhance their overall stiffness and structural stability. The beam steel formwork is usually made of large steel plates with a thickness of not less than 5mm, and the area of each formwork is not less than 2 square meters to ensure sufficient load-bearing capacity.

Material: Q235B, 5+1 composite plate, 201 stainless steel

Type: Mid beam , bottom beam

Advantages: Exquisite design, smooth welds, tight joints, and beautiful appearance

Purpose:  Construction of cast-in-situ bridge pier project

Basic Info

 

Model	Middle beam, bottom beam, customized
Certification	ISO
Material	Steel
Type	Beam Formwork
Colour	Blue
Fittings	Bolt
Surface Treatment	Spray Painted
Engineering Solutions	Graphic Design
Fixed Method	Bundling
Sales Unit	Ton
Supply Capacity	Spot Supply
Transport Package	Standard Sea-Transport Packing
Specification	Mid beam, bottom beam or Customized
Trademark	Shandong shangyuan
Origin	Shandong China
HS Code	7308400000
Production Capacity	10000 Ton/Year

Acceptance Criteria

 
The responsiveness document shall include a set of acceptance criteria, which shall serve as the basis for acceptance after confirmation through negotiation by homo sapiens. The acceptance criteria shall not be lower than internationally/domestically published standard.
 
1.The safety factor shall not be less than 1.5
 
2.The deformation value of steel template panel is less than 1.5mm, the thickness of the panel is not less than 6mm, and the deformation value of the back strap is less than 2mm.
 
3.The seam between the templates should not be larger than 1.0mm. The templates should be numbered in detail and equipped with pull rod nuts.
 
4.The welding between the template structures is full welding without jump welding.
 
5.The strength, stiffness and stability of the formwork meet the requirements of no deformation during multiple handling of the formwork.       
 
6.The template design meets the relevant national standard design requirements.
 
7.The design and production of the template meet the requirements of "Safety Technical Code for Construction Template" (JGJ162-2008).
 
8.The steel meets the national industry standard.
 
9.The template size is accurate, enough stiffness, the joint is tight and smooth, and the plate surface is smooth and clean.
 
10.In order to ensure the clear water effect of concrete finish, the joint between the template panel and the large template corresponds to the designed open joint and cicada joint.

Storage of steel templates

 
The storage and transportation of steel templates is a common problem encountered by the construction party. If the steel templates are stored better, how to transport the steel templates more safely? The solution is as follows:
Precautions for steel template storage
 
1..After the bidding materials arrive at the construction site, the consignee shall check whether the goods received are consistent with the delivery list. If
any difference is found, please contact the company's delivery personnel immediately for confirmation.
 
2..When unloading, forklift or crane should be selected according to the characteristics of goods and the location of unloading; do not throw directly on the ground, so as not to damage the steel template and cause safety accidents.
 
3..If there is no instant installation, it should be stored in the warehouse, not open to the air. If it is placed outdoors under conditions that do not allow, it should be stacked in a higher position, and plastic sheeting should be covered on top, firmly and securely to prevent sun and rain.

Our service

 
1. Consulting,Design,and Quotation
We provide you with the style and quality of steel templates you want to meet your project needs. According to your structural design and customized molding and support suggestions, through Auto-CAD.
 
2.Manufacture and Quality Inspection.
Large production workshop and first-class production line, as well as a professional quality inspection team, to provide you with high quality standard products.Test reports will be provided in accordance with different specifications in different regions to provide customers with no worries or meet the requirements of destination authorities.
 
3.Packing and Shipment.
From manufacturing to loading, use the standard export package to get to your site quickly.
 
4.Remote or On-site instruction.
If you have any questions, we can provide remote or on-site guidance. Our goal is to make customers feel at ease and satisfied throughout the process.